分享 收藏

德國萊馳行星式球磨儀 PM 100 CM

品牌：德國萊馳
型號： PM 100 CM
產地：歐洲德國
供應商報價：面議

弗爾德（上海）儀器設備有限公司更新時間：2025-02-20 15:05:07

銷售范圍售全國

入駐年限第10年

營業執照已審核

同類產品粉碎機、研磨機、球磨機(40件)

立即掃碼咨詢

聯系方式：021-87654090

聯系我們時請說明在儀器網（www.yosen.net.cn）上看到的!

掃碼分享

為您推薦

產品特點

詳細介紹

產品介紹：

The Planetary Ball Mill PM 100 CM is a powerful benchtop model with a single grinding station and an easy-to-use counterweight which compensates masses up to 8 kg. It allows for grinding up to 220 ml sample material per batch.

The extremely high centrifugal forces of Planetary Ball Mills result in very high pulverization energy and therefore short grinding times.

The PM 100 CM operates in centrifugal mode which leads to a more gentle size reduction process with less abrasion.

The mill can be found in virtually all industries where the quality control process places the highest demands on purity, speed, fineness and reproducibility.

It is ideally suited for research applications or ultrafine colloidal grinding, as well as for routine tasks such as mixing and homogenizing soft, hard, brittle or fibrous materials.

FAST & POWERFUL

Loss-free size reduction down to the submicron range
Wet grinding yields particle sizes in the nanometer range (<100 nm)
Variable speed from 100 to 650 rpm,
speed ratio 1:-1
Grinding with up to 33.3 x acceleration of gravity
Batch-wise processing with max. 1 x 220 ml sample
2 x 20 ml sample per batch with stacked jars

行星式球磨儀 PM 100 CMREPRODUCIBILITY, SAFETY AND EASY HANDLING

Reproducible results due to speed control
Easy and safe clamping of grinding jars
The Safety Slider prevents starting the machine without securely clamped jars
Perfect stability on the lab bench thanks to FFCS technology
Innovative counterweight and imbalance sensor for unsupervised operation
Comfortable parameter setting via display and ergonomic 1-button operation
Automatic grinding chamber ventilation
10 SOPs can be stored, programmable starting time
Power failure backup ensures storage of remaining processing time

SETTINGS & OPTIONS

Dry and wet grinding possible
Suitable for long-term trials, 99:59:59 h max.
Interval operation allows for cooling breaks
Direction reversal helps to minimize caking effects

行星式球磨儀 PM 100 CMWET GRINDING WITH THE PM 100 CM

Wet grinding is used to obtain particle sizes below 5 μm, as small particles tend to get charged on their surfaces and agglomerate, which makes further grinding in dry mode difficult. By adding a liquid or dispersant the particles can be kept separated.

To produce very fine particles below 1 micron by wet grinding, friction rather than impact is required. This is achieved by using a large number of small grinding balls which have a large surface and many friction points. The ideal filling level of the grinding jar should consist of 60 % small grinding balls.

For more details on jar filling, wet grinding and sample recovery click here.

The graphic shows the result of grinding zeolite microparticles at 600 rpm in the PM 100 CM. After 1.5 h of pulverization in isopropyl alcohol with 0.5 mm grinding balls, the D90 value of the original sample was reduced from 25 μm to 350 nm.

行星式球磨儀 PM 100 CM"COMFORT" GRINDING JARS FOR EXCELLENT RESULTS

The performance and the result of sample preparation are also determined by the choice of the grinding jar and its ball charge. The comfort range of grinding jars has been specially designed for extreme working conditions such as long-term trials, wet grinding, high mechanical loads and maximum speeds as well as for mechanical alloying.

Available jar sizes: 12 ml / 25 ml / 50 ml / 80 ml / 125 ml / 250 ml / 500 ml
Pressure-tight and dust-proof O-ring sealing prevents material spillage, even after clamping is released
Jars and balls available in 7 materials: hardened steel, stainless steel, tungsten carbide, agate, sintered aluminium oxide, silicon nitride, zirconium oxide
Stainless steel protective jacket for agate, sintered aluminum oxide, zirconium oxide and tungsten carbide grinding jars
A groove between jar body and lid allows for easy opening of the lid, e. g. with the help of a spatula, if there are underpressure effects inside the jar

JARS & LIDS FOR SPECIAL APPLICATIONS

For colloidal or wet grinding, the use of a grinding jar with a special closure device is recommended
Aeration lids are designed for working under inert atmosphere, for example if oxygen can influence the grinding process or the mechanosynthesis. The lids allow the introduction of gases like argon or nitrogen into the grinding jar.
Optional pressure and temperature measuring system PM GrindControl

行星式球磨儀 PM 100 CMRECOMMENDED JAR FILLINGS

To produce optimum grinding results, the jar size should be adapted to the sample amount to be processed. The grinding balls are ideally sized 3 times bigger than the largest sample piece. Following this rule of thumb, the number of grinding balls for each ball size and jar volume is indicated in the table below. To pulverize, for example, 200 ml of a sample consisting of 7 mm particles, a 500 ml jar and grinding balls sized at least 20 mm or larger are recommended. According to the table, 25 grinding balls are required.

Grinding jar nominal volume	Sample amount	Max. feed size	Recommended ball charge (pieces)
Grinding jar nominal volume	Sample amount	Max. feed size	? 5 mm	? 7 mm	? 10 mm	? 15 mm	? 20 mm	? 30 mm	? 40 mm
12 ml	直至 5 ml	<1 mm	50	15	5	-	-	-	-
25 ml	直至 10 ml	<1 mm	100	25	8	-	-	-	-
50 ml	5 – 20 ml	<3 mm	200	45	10	7	3	-	-
80 ml	10 – 35 ml	<4 mm	250	70	25	10	5	-	-
125 ml	15 – 50 ml	<4 mm	500	110	30	18	7	-	-
250 ml	25 – 120 ml	<6 mm	1200	220	50	45	15	6	-
500 ml	75 – 220 ml	<10 mm	2000	440	100	70	25	8	4

The table shows the recommended charges (in pieces) of differently sized grinding balls in relation to the grinding jar volume, sample amount and maximum feed size.

行星式球磨儀 PM 100 CM典型樣品材料

RETSCH planetary ball mills are perfectly suitable for size reduction of, for example, alloys, bentonite, bones, carbon fibres, catalysts, cellulose, cement clinker, ceramics, charcoal, chemical products, clay minerals, coal, coke, compost, concrete, electronic scrap, fibres, glass, gypsum, hair, hydroxyapatite, iron ore, kaolin, limestone, metal oxides, minerals, ores, paints and lacquers, paper, pigments, plant materials, polymers, quartz, seeds, semi-precious stones, sewage sludge, slag, soils, tissue, tobacco, waste samples, wood, etc.

行星式球磨儀 PM 100 CM技術參數

應用	粉碎、混合、均化、膠體研磨
應用領域	農業, 化學, 醫藥, 地質/冶金, 工程/電子, 建筑材料, 環境/循環, 玻璃/陶瓷, 生物
樣品特征	軟性, 硬性, 脆性, 纖維質—干或濕
粉碎原理：	撞擊力，摩擦力
最大進樣尺寸	< 10 mm
最終出料粒度 *	用于膠體研磨，出樣小于０.１微米
批次加料量*	最大 1 x 220 毫升使用堆疊管時：最大 2 x 20 毫升
研磨平臺數 (可接納研磨罐數)	1
轉速比設定	1:-1
太陽輪轉速	100 - 650 min-1
有效太陽輪直徑	141 mm
重力	33.3 g
研磨罐種類	"舒適型", 安全緊固裝置
研磨套件材料：	硬質剛, 不銹鋼, 碳化鎢, 瑪瑙, 燒結剛玉, 氮化硅, 氧化鋯
研磨罐尺寸	12 ml / 25 ml / 50 ml / 80 ml / 125 ml / 250 ml / 500 ml
粉碎時間設定	數字設定 00:00:01 至 99:59:59
間歇驅動	可以，反向轉動
轉動時間	數字設定 00:00:01 至 99:59:59
暫停時間	數字設定 00:00:01 至 99:59:59
可存儲運行模式	10
串行接口	RS 232 / RS 485
驅動	帶變頻器的三相交流電動機
驅動功率	750瓦
電源數據：	不同電壓
電源接頭：	單相
防護類型	IP 30
接受功率	~ 1250W (VA)
機體尺寸（寬x高x縱深）	640 x 480 (780) x 420 mm
凈重	~ 86 kg
標準	CE
專利/實用專利	配重（DE 20307741），FFCS（DE 20310654），安全滑塊（DE 202008008473）。

受樣品材料性質和儀器配置/設定的影響

行星式球磨儀 PM 100 CM

作用原理

行星式球磨儀的研磨罐位于底部太陽輪的偏心位置。研磨罐繞軸自轉，與公共的太陽輪轉動方向正好想法，太陽輪與研磨罐的轉速比為1：-1。研磨罐中的球在于研磨罐一起運動時受到Coriolis力（即自轉偏向力）的疊加影響。研磨罐和研磨球的運動速度之差產生強摩擦力和撞擊力，因而釋放了大量的動能。這種撞擊和摩擦的組合使得行星式球磨儀研磨時的粉碎度及高。為了保持運動時的平衡，擁有一個研磨工位的行星式球磨儀需要配重。PM100CM型行星式球磨儀的配重可在一條傾斜的導軌上調整。不同大小的研磨罐的不同重心高度由此得到精確的補償，從而避免了儀器運行時的晃動和振蕩。剩余的振動可以通過儀器底座的微小自由運動（底座自由力補償）得到補償。這種新型的FFCS技術基于d’Alembert原理，允許機身作很小的回旋運動，自動完成質量補償。實驗桌面只受到儀器底座產生的微小摩擦力。 PM100CM型行星式球磨儀運行時安靜、安全，即使在罐內振動達到最大時仍能保證最優的振動補償，因此可置于實驗室桌面，無需監護。